Weak WiFi connection can be a really frustrating issue at times. Most WiFi routers come with a limited connectivity range. Extenders are devices that enable you to have a strong WiFi signal at every corner of the house. With these devices, you can easily extend the range of your router’s function.
Netgear manufactures efficient routers and extenders that come with cutting-edge features. But purchasing an extender simply won’t help you to enjoy a long range of WiFi connectivity. Hence, you need to configure it properly first.
Netgear Nighthawk ex7000 is one of the most widely used extenders. In this article, we’ll provide you with a guide to Netgear ex7000 setup.
Methods for Netgear Nighthawk ex7000 Setup:
There are two possible ways by which you can perform the Netgear ex7000 setup. Those are:
- Manual Setup: You can set up your Netgear ex7000 with the help of the Netgear installation assistant. For this, you will need the help of your web browser. This particular method of extender setup usually takes a longer time to execute.
- Setup through the WPS button: This is the easiest and fastest way to configure any Netgear extender. You can even perform this set up with the WPS button on your router and extender. You will hardly need a couple of minutes to set up your extender through this method.
In this section, we’ll discuss about both the methods in detail. Else, you can follow one as per your choice.
Method 1: Manual Setup
To manually setup Netgear ex7000 you need the help of Netgear installation assistant. To perform this go through the following instructions:
At first, place the Netgear ex7000 with a power supply and then turn it on. Put the extender close to your router. Now, connect your computer or laptop to the extender with the help of Ethernet or WiFi.
To connect to the WiFi launch the ‘WiFi connection manager’ first. Then, locate the extender network and connect to it. When the connection is successful, the Client LED indicator will turn white.
If you have to connect the devices using the Ethernet then make use of Ethernet cables. Connect the Ethernet ports of both the extender and the computer with these cables.
Now, from a web browser, visit www.mywifiext.net. Therefore, when you reach this site you’ll get to see the Netgear installation assistant. Now, follow the instructions given to you on the screen. Following the instructions to connect the Netgear extender to the WiFi network that you want to extend.
After you select the desired network, type the username and password. You can also connect multiple WiFi networks to the extender.
Thereafter, put a name for the SSID of your extender’s network along with the new password. Then, click on ‘Next’ and then start to connect the extender network with the WiFi-enabled device. After successfully connecting them, click on the ‘Continue’ option.
A message will pop up informing you that the extender has been connected and is ready for use. Then, click on the ‘Next’ option. A registration page will appear. Carefully fill up all the blank spaces of the registration box and tap on ‘Finish’.
Method 2: Netgear ex7000 Setup through WPS
This is another alternate method by which you can execute the Netgear Nighthawk ex7000 setup. Hence, follow these steps to perform the configuration with this method:
At first, turn on the Netgear Nighthawk ex7000 extender. Keep it in the same room where your WiFi is. Now, connect the extender to a power supplying cord. When the Power LED turns on press the WPS button on the extender. You can find this button at the rear portion of the extender.
In case you fail to locate the button, you can take help from the user manual guide.
After turning on the WPS of the extender, press the WPS On the router as well. If the Link Status LED on the extender blinks white it means that the configuration is successful.
Verify the Performance of Your Netgear Extender:
So, you’ve successfully configured your Netgear ex7000 extender. Now, you must check how well is it functioning. For this, you should move the extender far away from the router. Now, check the Router Link LED light to make sure how well it is working.
If this LED is not green then the connection between the router and the extender is not strong enough. Move the extender close to the router until the Router Link displays green indication.
To sum up, a strong WiFi connection is necessary for you to perform any professional or personal tasks. A poor WiFi signal can be quite a frustrating experience. Moreover, it can substantially damage and hamper your workflow. To avoid all this, you must necessarily use an extender.
The first thing that you should do after purchasing an extender is to configure it appropriately. If you’re wondering how to setup Netgear ex7000 extender then follow the above-mentioned guidelines.